Wall coatings are used to protect and beautify structures. Coatings when installed properly will eliminate damaging water penetration. Water damage can sometimes be seen with the naked eye. If you can see spalling or cracking there is a good chance that water is penetrating into the buildings reinforcing steel or substructure. This damage is a slow destructive but sure process.
We coat concrete to protect it from chemical and physical attack. We also coat it to protect products stored or processed in direct contact with the concrete from contamination caused by dust from the substrate. And we coat concrete to improve its appearance, ease of maintenance, and light reflectance. As long as coatings are properly applied to an adequately prepared concrete surface, they can prolong the life of the structure.
We specialize in the installation of all type of joint sealants including polyurethane, silicone, latex and flexible epoxies. We install sealants in new buildings, and remove and replace old sealants in existing buildings. We have performed sealant replacement in a number of historical buildings and work with engineers and architects to install new expansion joints in buildings that are exhibiting damage due to movement.
We strive to provide a comprehensive line of the most up to date waterproofing systems which combine to address all of a building owners waterproofing needs. We are certified to install below grade waterproofing systems including bentonite sheet waterproofing, bituminous composite sheet waterproofing and liquid applied membranes and mastics for below grade foundations, plaza decks, pools and planter liners.
Decorative coatings are liquid-applied waterproof toppings with an integral aggregate surface. It forms a continuous elastomeric, waterproof, and skid-resistant membrane for use on parking decks, balconies, and other surfaces exposed to vehicular and pedestrian traffic. Use on concrete masonry, exterior-grade plywood, and incidental metal surfaces.
For new or existing concrete, decorative coating systems is an excellent way to combine color, texture and architectural design with a cost effective protective coating. The system can be combined to provide pitch and blend uneven surfaces with adjacent areas. The result is lasting elegance for balconies, entry ways, pool decks, valet areas and drive ways.
Expansion joints come in vast range of different types of material; polyurethanes, santoprene, neoprene, and silicones. There are many different applications such as; above grade walls, below grade walls, parking decks, and interior floors. This system is going to allow your walls , decks, or floors to expand and contract with the changes in weather or the settlement of your building or parking deck. In parking deck systems they are specially designed to absorb the impact of heavy vehicular traffic and extreme movement.
Exterior Insulation and Finish Systems (EIFS) are multi-layered exterior wall systems that are used on both commercial buildings and homes. The indicators that your EIFS area should be repaired; you may see cracking which is allowing moisture to migrate through your walls which probably is not being seen but in the long run is damaging your building structure, or the obvious which is where you have an area which has been damaged by an object puncturing a hole through the system.
With the ever rising traffic coming to your commercial property the need for EIFS repair is constant. We repair all types of EIFS from the substrate all the way to the finish coat.
When does tile or stone need to be repaired? Damaged surfaces might need just a simple repair and some cleaning to look new again. In other cases, frequent problems that might be cause the tile or stone to be replaced are any cracked, chipped, or possibly hollow sounding areas. Spotting the cracked and chipped pieces is an easy thing to do, the hollow tiles are a little bit harder you may take broom stick and tap on each tile you will be able to tell the hollow tiles from the well bonded tiles.
Stone and Tile repair requires intense as well as precise substrate preparation. We will delicately remove damaged tile or stone without damaging adjacent like materials. Prepare substrate and install new tile clean and precise.
Let us be your choice for all your concrete pouring and forming projects. We have a great amount of experience pouring and setting both small and large concrete formations, and take the neccessary steps to insure that your project is built to last.
A little preparation goes a long a way, so let us plan your project from start to finish. You will find our service professional and attentive.